Excavator Repair Cost
A hydraulic cylinder reseal / replacement on a Komatsu PC200-8 typically runs $1,200-$7,650 all in. Below is the labor and parts breakdown, what drives the cost up or down, and how to get an exact number for your machine.
Free. Enter your symptoms and get a tailored labor, parts, and total range.
Komatsu PC200-8 hydraulic cylinder
$1,200-$7,650
estimated total, parts and labor
Labor hours
4-11 hrs
Shop rate
$125-$175/hr
Parts
$700-$5,700
* Static estimate from heavy-equipment norms, not a quote. Real cost depends on parts source, access, and collateral damage.Get an exact estimate →
Removing the cylinder (boom, arm, bucket, lift, or tilt), then either resealing it with a new seal kit and honing the barrel, or replacing the cylinder outright if the rod is scored or bent. Resealing is far cheaper than replacement when the barrel and rod are still good.
The range above moves with these factors. The biggest swing is usually parts source and whether the failure damaged anything downstream.
Describe the job on your Komatsu PC200-8 and get a tailored labor, parts, and total range. Free and instant.
A hydraulic cylinder repair at $1,200-$7,650 is usually worth it on a Komatsu PC200-8, but it pays to know the machine's current value first.
See Komatsu PC200-8 resale value →Hydraulic Pump Replacement
$6,000-$14,400
Final Drive / Travel Motor Replacement
$4,600-$14,600
Undercarriage Replacement
$8,550-$52,000
Engine Rebuild / Replacement
$14,700-$53,450
Fuel Injector / Injection System Repair
$2,100-$13,150
A/C Compressor / System Repair
$1,000-$4,600
Alternator Replacement
$600-$2,300
Starter Motor Replacement
$700-$2,650