Excavator Repair Cost

2007-2014 Komatsu PC200-8 Hydraulic Pump Replacement Cost

A hydraulic pump replacement on a Komatsu PC200-8 typically runs $6,000-$14,400 all in. Below is the labor and parts breakdown, what drives the cost up or down, and how to get an exact number for your machine.

138 HP44.6k lbs8-16 labor hrs
Get a custom estimate for your machine

Free. Enter your symptoms and get a tailored labor, parts, and total range.

Typical Repair Cost

Komatsu PC200-8 hydraulic pump

$6,000-$14,400

estimated total, parts and labor

Labor hours

8-16 hrs

Shop rate

$125-$175/hr

Parts

$5,000-$11,600

* Static estimate from heavy-equipment norms, not a quote. Real cost depends on parts source, access, and collateral damage.Get an exact estimate →

What's involved in a Komatsu PC200-8 hydraulic pump repair

Draining and flushing the hydraulic system, removing guarding and lines to reach the pump, swapping the pump (or pump group), then bleeding the system and pressure-testing. On larger machines the pump sits under the cab or counterweight, which adds hours.

What affects the cost

The range above moves with these factors. The biggest swing is usually parts source and whether the failure damaged anything downstream.

Sanity-check a shop quote in 60 seconds

Describe the job on your Komatsu PC200-8 and get a tailored labor, parts, and total range. Free and instant.

Frequently asked questions

How much does a Komatsu PC200-8 hydraulic pump repair cost?
A hydraulic pump replacement on a Komatsu PC200-8 typically runs $6,000-$14,400. That covers about 8-16 hours of labor at a $125-$175/hr shop rate, plus $5,000-$11,600 in parts. Your exact number depends on parts source (OEM vs. reman) and how much collateral damage there is. Get a free custom estimate at equipbook.ai/service/estimate.
How many labor hours is a Komatsu PC200-8 hydraulic pump job?
Plan on roughly 8 to 16 labor hours for a hydraulic pump repair on a Komatsu PC200-8. Access and how the machine is configured can push that up or down.
What's involved in a Komatsu PC200-8 hydraulic pump repair?
Draining and flushing the hydraulic system, removing guarding and lines to reach the pump, swapping the pump (or pump group), then bleeding the system and pressure-testing. On larger machines the pump sits under the cab or counterweight, which adds hours.
Is it worth fixing the hydraulic pump on a Komatsu PC200-8?
At $6,000-$14,400, weigh the repair against the machine's current value. A Komatsu PC200-8 in good condition is worth far more than this repair, so it usually pays to fix it. Check what your machine is worth first, then decide. Use the free valuation at equipbook.ai/value/komatsu-pc200-8.