Excavator Repair Cost

2007-2014 Komatsu PC200-8 Undercarriage Replacement Cost

A undercarriage replacement on a Komatsu PC200-8 typically runs $8,550-$52,000 all in. Below is the labor and parts breakdown, what drives the cost up or down, and how to get an exact number for your machine.

138 HP44.6k lbs11-32 labor hrs
Get a custom estimate for your machine

Free. Enter your symptoms and get a tailored labor, parts, and total range.

Typical Repair Cost

Komatsu PC200-8 undercarriage

$8,550-$52,000

estimated total, parts and labor

Labor hours

11-32 hrs

Shop rate

$125-$175/hr

Parts

$7,150-$46,400

* Static estimate from heavy-equipment norms, not a quote. Real cost depends on parts source, access, and collateral damage.Get an exact estimate →

What's involved in a Komatsu PC200-8 undercarriage repair

Replacing wear parts as a set: track chains, rollers (top and bottom), idlers, sprockets, and the track shoes or rubber tracks. A full undercarriage is a big-ticket maintenance item, not a single failure, and is usually done all at once to avoid re-tearing the machine down.

What affects the cost

The range above moves with these factors. The biggest swing is usually parts source and whether the failure damaged anything downstream.

Sanity-check a shop quote in 60 seconds

Describe the job on your Komatsu PC200-8 and get a tailored labor, parts, and total range. Free and instant.

Frequently asked questions

How much does a Komatsu PC200-8 undercarriage repair cost?
A undercarriage replacement on a Komatsu PC200-8 typically runs $8,550-$52,000. That covers about 11-32 hours of labor at a $125-$175/hr shop rate, plus $7,150-$46,400 in parts. Your exact number depends on parts source (OEM vs. reman) and how much collateral damage there is. Get a free custom estimate at equipbook.ai/service/estimate.
How many labor hours is a Komatsu PC200-8 undercarriage job?
Plan on roughly 11 to 32 labor hours for a undercarriage repair on a Komatsu PC200-8. Access and how the machine is configured can push that up or down.
What's involved in a Komatsu PC200-8 undercarriage repair?
Replacing wear parts as a set: track chains, rollers (top and bottom), idlers, sprockets, and the track shoes or rubber tracks. A full undercarriage is a big-ticket maintenance item, not a single failure, and is usually done all at once to avoid re-tearing the machine down.
Is it worth fixing the undercarriage on a Komatsu PC200-8?
At $8,550-$52,000, weigh the repair against the machine's current value. A Komatsu PC200-8 in good condition is worth far more than this repair, so it usually pays to fix it. Check what your machine is worth first, then decide. Use the free valuation at equipbook.ai/value/komatsu-pc200-8.