Excavator Repair Cost

2017-2025 Komatsu PC390LC-11 Engine Rebuild / Replacement Cost

A engine rebuild / replacement on a Komatsu PC390LC-11 typically runs $25,550-$92,800 all in. Below is the labor and parts breakdown, what drives the cost up or down, and how to get an exact number for your machine.

302 HP89.5k lbs43-108 labor hrs
Get a custom estimate for your machine

Free. Enter your symptoms and get a tailored labor, parts, and total range.

Typical Repair Cost

Komatsu PC390LC-11 engine rebuild

$25,550-$92,800

estimated total, parts and labor

Labor hours

43-108 hrs

Shop rate

$125-$175/hr

Parts

$20,150-$73,900

* Static estimate from heavy-equipment norms, not a quote. Real cost depends on parts source, access, and collateral damage.Get an exact estimate →

What's involved in a Komatsu PC390LC-11 engine rebuild repair

Pulling the engine (or doing an in-frame), inspecting the block, and replacing pistons, rings, bearings, gaskets and seals, or dropping in a reman long block. Tier 4 emissions hardware (DPF, EGR, aftertreatment) adds labor and parts on newer machines.

What affects the cost

The range above moves with these factors. The biggest swing is usually parts source and whether the failure damaged anything downstream.

Sanity-check a shop quote in 60 seconds

Describe the job on your Komatsu PC390LC-11 and get a tailored labor, parts, and total range. Free and instant.

Frequently asked questions

How much does a Komatsu PC390LC-11 engine rebuild repair cost?
A engine rebuild / replacement on a Komatsu PC390LC-11 typically runs $25,550-$92,800. That covers about 43-108 hours of labor at a $125-$175/hr shop rate, plus $20,150-$73,900 in parts. Your exact number depends on parts source (OEM vs. reman) and how much collateral damage there is. Get a free custom estimate at equipbook.ai/service/estimate.
How many labor hours is a Komatsu PC390LC-11 engine rebuild job?
Plan on roughly 43 to 108 labor hours for a engine rebuild repair on a Komatsu PC390LC-11. Access and how the machine is configured can push that up or down.
What's involved in a Komatsu PC390LC-11 engine rebuild repair?
Pulling the engine (or doing an in-frame), inspecting the block, and replacing pistons, rings, bearings, gaskets and seals, or dropping in a reman long block. Tier 4 emissions hardware (DPF, EGR, aftertreatment) adds labor and parts on newer machines.
Is it worth fixing the engine rebuild on a Komatsu PC390LC-11?
At $25,550-$92,800, weigh the repair against the machine's current value. A Komatsu PC390LC-11 in good condition is worth far more than this repair, so it usually pays to fix it. Check what your machine is worth first, then decide. Use the free valuation at equipbook.ai/value/komatsu-pc390lc-11.

Before you fix it, know what it's worth

A engine rebuild repair at $25,550-$92,800 is usually worth it on a Komatsu PC390LC-11, but it pays to know the machine's current value first.

See Komatsu PC390LC-11 resale value →