Excavator Repair Cost

2018-2026 Komatsu PC360LCi-11 Engine Rebuild / Replacement Cost

A engine rebuild / replacement on a Komatsu PC360LCi-11 typically runs $25,550-$92,800 all in. Below is the labor and parts breakdown, what drives the cost up or down, and how to get an exact number for your machine.

257 HP80.5k lbs43-108 labor hrs
Get a custom estimate for your machine

Free. Enter your symptoms and get a tailored labor, parts, and total range.

Typical Repair Cost

Komatsu PC360LCi-11 engine rebuild

$25,550-$92,800

estimated total, parts and labor

Labor hours

43-108 hrs

Shop rate

$125-$175/hr

Parts

$20,150-$73,900

* Static estimate from heavy-equipment norms, not a quote. Real cost depends on parts source, access, and collateral damage.Get an exact estimate →

What's involved in a Komatsu PC360LCi-11 engine rebuild repair

Pulling the engine (or doing an in-frame), inspecting the block, and replacing pistons, rings, bearings, gaskets and seals, or dropping in a reman long block. Tier 4 emissions hardware (DPF, EGR, aftertreatment) adds labor and parts on newer machines.

What affects the cost

The range above moves with these factors. The biggest swing is usually parts source and whether the failure damaged anything downstream.

Sanity-check a shop quote in 60 seconds

Describe the job on your Komatsu PC360LCi-11 and get a tailored labor, parts, and total range. Free and instant.

Frequently asked questions

How much does a Komatsu PC360LCi-11 engine rebuild repair cost?
A engine rebuild / replacement on a Komatsu PC360LCi-11 typically runs $25,550-$92,800. That covers about 43-108 hours of labor at a $125-$175/hr shop rate, plus $20,150-$73,900 in parts. Your exact number depends on parts source (OEM vs. reman) and how much collateral damage there is. Get a free custom estimate at equipbook.ai/service/estimate.
How many labor hours is a Komatsu PC360LCi-11 engine rebuild job?
Plan on roughly 43 to 108 labor hours for a engine rebuild repair on a Komatsu PC360LCi-11. Access and how the machine is configured can push that up or down.
What's involved in a Komatsu PC360LCi-11 engine rebuild repair?
Pulling the engine (or doing an in-frame), inspecting the block, and replacing pistons, rings, bearings, gaskets and seals, or dropping in a reman long block. Tier 4 emissions hardware (DPF, EGR, aftertreatment) adds labor and parts on newer machines.
Is it worth fixing the engine rebuild on a Komatsu PC360LCi-11?
At $25,550-$92,800, weigh the repair against the machine's current value. A Komatsu PC360LCi-11 in good condition is worth far more than this repair, so it usually pays to fix it. Check what your machine is worth first, then decide. Use the free valuation at equipbook.ai/value/komatsu-pc360lci-11.

Before you fix it, know what it's worth

A engine rebuild repair at $25,550-$92,800 is usually worth it on a Komatsu PC360LCi-11, but it pays to know the machine's current value first.

See Komatsu PC360LCi-11 resale value →