Dozer Repair Cost

2020-2026 John Deere 850P Final Drive / Travel Motor Replacement Cost

A final drive / travel motor replacement on a John Deere 850P typically runs $5,150-$16,400 all in. Below is the labor and parts breakdown, what drives the cost up or down, and how to get an exact number for your machine.

215 HP42.5k lbs5-12 labor hrs
Get a custom estimate for your machine

Free. Enter your symptoms and get a tailored labor, parts, and total range.

Typical Repair Cost

John Deere 850P final drive (travel motor)

$5,150-$16,400

estimated total, parts and labor

Labor hours

5-12 hrs

Shop rate

$125-$175/hr

Parts

$4,500-$14,300

* Static estimate from heavy-equipment norms, not a quote. Real cost depends on parts source, access, and collateral damage.Get an exact estimate →

What's involved in a John Deere 850P final drive (travel motor) repair

Lifting or blocking the track, removing the track chain or loosening tension, unbolting the final drive (travel motor plus planetary hub), then installing the replacement and refilling gear oil. Track removal is the time sink, not the drive itself.

What affects the cost

The range above moves with these factors. The biggest swing is usually parts source and whether the failure damaged anything downstream.

Sanity-check a shop quote in 60 seconds

Describe the job on your John Deere 850P and get a tailored labor, parts, and total range. Free and instant.

Frequently asked questions

How much does a John Deere 850P final drive (travel motor) repair cost?
A final drive / travel motor replacement on a John Deere 850P typically runs $5,150-$16,400. That covers about 5-12 hours of labor at a $125-$175/hr shop rate, plus $4,500-$14,300 in parts. Your exact number depends on parts source (OEM vs. reman) and how much collateral damage there is. Get a free custom estimate at equipbook.ai/service/estimate.
How many labor hours is a John Deere 850P final drive (travel motor) job?
Plan on roughly 5 to 12 labor hours for a final drive (travel motor) repair on a John Deere 850P. Access and how the machine is configured can push that up or down.
What's involved in a John Deere 850P final drive (travel motor) repair?
Lifting or blocking the track, removing the track chain or loosening tension, unbolting the final drive (travel motor plus planetary hub), then installing the replacement and refilling gear oil. Track removal is the time sink, not the drive itself.
Is it worth fixing the final drive (travel motor) on a John Deere 850P?
At $5,150-$16,400, weigh the repair against the machine's current value. A John Deere 850P in good condition is worth far more than this repair, so it usually pays to fix it. Check what your machine is worth first, then decide. Use the free valuation at equipbook.ai/value/john-deere-850p.

Before you fix it, know what it's worth

A final drive (travel motor) repair at $5,150-$16,400 is usually worth it on a John Deere 850P, but it pays to know the machine's current value first.

See John Deere 850P resale value →