Excavator Repair Cost

2018-2026 Doosan DX235LCR-7 Engine Rebuild / Replacement Cost

A engine rebuild / replacement on a Doosan DX235LCR-7 typically runs $14,700-$53,450 all in. Below is the labor and parts breakdown, what drives the cost up or down, and how to get an exact number for your machine.

174 HP52.5k lbs32-81 labor hrs
Get a custom estimate for your machine

Free. Enter your symptoms and get a tailored labor, parts, and total range.

Typical Repair Cost

Doosan DX235LCR-7 engine rebuild

$14,700-$53,450

estimated total, parts and labor

Labor hours

32-81 hrs

Shop rate

$125-$175/hr

Parts

$10,700-$39,250

* Static estimate from heavy-equipment norms, not a quote. Real cost depends on parts source, access, and collateral damage.Get an exact estimate →

What's involved in a Doosan DX235LCR-7 engine rebuild repair

Pulling the engine (or doing an in-frame), inspecting the block, and replacing pistons, rings, bearings, gaskets and seals, or dropping in a reman long block. Tier 4 emissions hardware (DPF, EGR, aftertreatment) adds labor and parts on newer machines.

What affects the cost

The range above moves with these factors. The biggest swing is usually parts source and whether the failure damaged anything downstream.

Sanity-check a shop quote in 60 seconds

Describe the job on your Doosan DX235LCR-7 and get a tailored labor, parts, and total range. Free and instant.

Frequently asked questions

How much does a Doosan DX235LCR-7 engine rebuild repair cost?
A engine rebuild / replacement on a Doosan DX235LCR-7 typically runs $14,700-$53,450. That covers about 32-81 hours of labor at a $125-$175/hr shop rate, plus $10,700-$39,250 in parts. Your exact number depends on parts source (OEM vs. reman) and how much collateral damage there is. Get a free custom estimate at equipbook.ai/service/estimate.
How many labor hours is a Doosan DX235LCR-7 engine rebuild job?
Plan on roughly 32 to 81 labor hours for a engine rebuild repair on a Doosan DX235LCR-7. Access and how the machine is configured can push that up or down.
What's involved in a Doosan DX235LCR-7 engine rebuild repair?
Pulling the engine (or doing an in-frame), inspecting the block, and replacing pistons, rings, bearings, gaskets and seals, or dropping in a reman long block. Tier 4 emissions hardware (DPF, EGR, aftertreatment) adds labor and parts on newer machines.
Is it worth fixing the engine rebuild on a Doosan DX235LCR-7?
At $14,700-$53,450, weigh the repair against the machine's current value. A Doosan DX235LCR-7 in good condition is worth far more than this repair, so it usually pays to fix it. Check what your machine is worth first, then decide. Use the free valuation at equipbook.ai/value/doosan-dx235lcr-7.

Before you fix it, know what it's worth

A engine rebuild repair at $14,700-$53,450 is usually worth it on a Doosan DX235LCR-7, but it pays to know the machine's current value first.

See Doosan DX235LCR-7 resale value →