Wheel Loader Repair Cost

2020-2025 Doosan DL420-7 Engine Rebuild / Replacement Cost

A engine rebuild / replacement on a Doosan DL420-7 typically runs $16,250-$59,100 all in. Below is the labor and parts breakdown, what drives the cost up or down, and how to get an exact number for your machine.

272 HP48k lbs32-81 labor hrs
Get a custom estimate for your machine

Free. Enter your symptoms and get a tailored labor, parts, and total range.

Typical Repair Cost

Doosan DL420-7 engine rebuild

$16,250-$59,100

estimated total, parts and labor

Labor hours

32-81 hrs

Shop rate

$125-$175/hr

Parts

$12,250-$44,900

* Static estimate from heavy-equipment norms, not a quote. Real cost depends on parts source, access, and collateral damage.Get an exact estimate →

What's involved in a Doosan DL420-7 engine rebuild repair

Pulling the engine (or doing an in-frame), inspecting the block, and replacing pistons, rings, bearings, gaskets and seals, or dropping in a reman long block. Tier 4 emissions hardware (DPF, EGR, aftertreatment) adds labor and parts on newer machines.

What affects the cost

The range above moves with these factors. The biggest swing is usually parts source and whether the failure damaged anything downstream.

Sanity-check a shop quote in 60 seconds

Describe the job on your Doosan DL420-7 and get a tailored labor, parts, and total range. Free and instant.

Frequently asked questions

How much does a Doosan DL420-7 engine rebuild repair cost?
A engine rebuild / replacement on a Doosan DL420-7 typically runs $16,250-$59,100. That covers about 32-81 hours of labor at a $125-$175/hr shop rate, plus $12,250-$44,900 in parts. Your exact number depends on parts source (OEM vs. reman) and how much collateral damage there is. Get a free custom estimate at equipbook.ai/service/estimate.
How many labor hours is a Doosan DL420-7 engine rebuild job?
Plan on roughly 32 to 81 labor hours for a engine rebuild repair on a Doosan DL420-7. Access and how the machine is configured can push that up or down.
What's involved in a Doosan DL420-7 engine rebuild repair?
Pulling the engine (or doing an in-frame), inspecting the block, and replacing pistons, rings, bearings, gaskets and seals, or dropping in a reman long block. Tier 4 emissions hardware (DPF, EGR, aftertreatment) adds labor and parts on newer machines.
Is it worth fixing the engine rebuild on a Doosan DL420-7?
At $16,250-$59,100, weigh the repair against the machine's current value. A Doosan DL420-7 in good condition is worth far more than this repair, so it usually pays to fix it. Check what your machine is worth first, then decide. Use the free valuation at equipbook.ai/value/doosan-dl420-7.

Before you fix it, know what it's worth

A engine rebuild repair at $16,250-$59,100 is usually worth it on a Doosan DL420-7, but it pays to know the machine's current value first.

See Doosan DL420-7 resale value →

Other Doosan DL420-7 repair costs