Excavator Repair Cost

2018-2025 Caterpillar M317F Engine Rebuild / Replacement Cost

A engine rebuild / replacement on a Caterpillar M317F typically runs $14,700-$53,450 all in. Below is the labor and parts breakdown, what drives the cost up or down, and how to get an exact number for your machine.

130 HP40.5k lbs32-81 labor hrs
Get a custom estimate for your machine

Free. Enter your symptoms and get a tailored labor, parts, and total range.

Typical Repair Cost

Caterpillar M317F engine rebuild

$14,700-$53,450

estimated total, parts and labor

Labor hours

32-81 hrs

Shop rate

$125-$175/hr

Parts

$10,700-$39,250

* Static estimate from heavy-equipment norms, not a quote. Real cost depends on parts source, access, and collateral damage.Get an exact estimate →

What's involved in a Caterpillar M317F engine rebuild repair

Pulling the engine (or doing an in-frame), inspecting the block, and replacing pistons, rings, bearings, gaskets and seals, or dropping in a reman long block. Tier 4 emissions hardware (DPF, EGR, aftertreatment) adds labor and parts on newer machines.

What affects the cost

The range above moves with these factors. The biggest swing is usually parts source and whether the failure damaged anything downstream.

Sanity-check a shop quote in 60 seconds

Describe the job on your Caterpillar M317F and get a tailored labor, parts, and total range. Free and instant.

Frequently asked questions

How much does a Caterpillar M317F engine rebuild repair cost?
A engine rebuild / replacement on a Caterpillar M317F typically runs $14,700-$53,450. That covers about 32-81 hours of labor at a $125-$175/hr shop rate, plus $10,700-$39,250 in parts. Your exact number depends on parts source (OEM vs. reman) and how much collateral damage there is. Get a free custom estimate at equipbook.ai/service/estimate.
How many labor hours is a Caterpillar M317F engine rebuild job?
Plan on roughly 32 to 81 labor hours for a engine rebuild repair on a Caterpillar M317F. Access and how the machine is configured can push that up or down.
What's involved in a Caterpillar M317F engine rebuild repair?
Pulling the engine (or doing an in-frame), inspecting the block, and replacing pistons, rings, bearings, gaskets and seals, or dropping in a reman long block. Tier 4 emissions hardware (DPF, EGR, aftertreatment) adds labor and parts on newer machines.
Is it worth fixing the engine rebuild on a Caterpillar M317F?
At $14,700-$53,450, weigh the repair against the machine's current value. A Caterpillar M317F in good condition is worth far more than this repair, so it usually pays to fix it. Check what your machine is worth first, then decide. Use the free valuation at equipbook.ai/value/caterpillar-m317f.

Before you fix it, know what it's worth

A engine rebuild repair at $14,700-$53,450 is usually worth it on a Caterpillar M317F, but it pays to know the machine's current value first.

See Caterpillar M317F resale value →