Compact Track Loader Repair Cost

2019-2025 Bobcat T740 Final Drive / Travel Motor Replacement Cost

A final drive / travel motor replacement on a Bobcat T740 typically runs $1,700-$5,250 all in. Below is the labor and parts breakdown, what drives the cost up or down, and how to get an exact number for your machine.

82 HP9.5k lbs3-6 labor hrs
Get a custom estimate for your machine

Free. Enter your symptoms and get a tailored labor, parts, and total range.

Typical Repair Cost

Bobcat T740 final drive (travel motor)

$1,700-$5,250

estimated total, parts and labor

Labor hours

3-6 hrs

Shop rate

$125-$175/hr

Parts

$1,300-$4,200

* Static estimate from heavy-equipment norms, not a quote. Real cost depends on parts source, access, and collateral damage.Get an exact estimate →

What's involved in a Bobcat T740 final drive (travel motor) repair

Lifting or blocking the track, removing the track chain or loosening tension, unbolting the final drive (travel motor plus planetary hub), then installing the replacement and refilling gear oil. Track removal is the time sink, not the drive itself.

What affects the cost

The range above moves with these factors. The biggest swing is usually parts source and whether the failure damaged anything downstream.

Sanity-check a shop quote in 60 seconds

Describe the job on your Bobcat T740 and get a tailored labor, parts, and total range. Free and instant.

Frequently asked questions

How much does a Bobcat T740 final drive (travel motor) repair cost?
A final drive / travel motor replacement on a Bobcat T740 typically runs $1,700-$5,250. That covers about 3-6 hours of labor at a $125-$175/hr shop rate, plus $1,300-$4,200 in parts. Your exact number depends on parts source (OEM vs. reman) and how much collateral damage there is. Get a free custom estimate at equipbook.ai/service/estimate.
How many labor hours is a Bobcat T740 final drive (travel motor) job?
Plan on roughly 3 to 6 labor hours for a final drive (travel motor) repair on a Bobcat T740. Access and how the machine is configured can push that up or down.
What's involved in a Bobcat T740 final drive (travel motor) repair?
Lifting or blocking the track, removing the track chain or loosening tension, unbolting the final drive (travel motor plus planetary hub), then installing the replacement and refilling gear oil. Track removal is the time sink, not the drive itself.
Is it worth fixing the final drive (travel motor) on a Bobcat T740?
At $1,700-$5,250, weigh the repair against the machine's current value. A Bobcat T740 in good condition is worth far more than this repair, so it usually pays to fix it. Check what your machine is worth first, then decide. Use the free valuation at equipbook.ai/value/bobcat-t740.